Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Yamato CPC-2000
Summary of Contents for Yamato CPC-2000
- Page 1 CPC-2000 Operation Manual YAMATO CORPORATION YAMATO TECH CORPORATION 1775 S. Murray Blvd. #112-19425 Langley By-Pass Colorado Springs, CO 80916 USA Surrey, B.C. V3S 6K1 Canada www.yamatocorp.com Tel (719) 591-1500 Fax (719) 591-1045 Tel (604) 533-2338 Fax (604) 533-0827 YCO-1093-04-02...
-
Page 2: Table Of Contents
CPC-2000 Operation Manual Table of Contents Name and Function of Parts Specifications III. Setup Installing the AC Adaptor Charging the Battery Leveling the Scale Setting the User Functions IV. Directions for Use Turning the Scale On and Off Low Battery Condition... -
Page 3: Name And Function Of Parts
CPC-2000 Operation Manual I Name and Function of Parts CPC-2000 WEIGHT ON/OFF UNIT TARE RECHARGE 2 kg x 0.001 kg 4 lb x 0.002 lb 80 oz x 0.05 oz 5 lb x 0.05 oz lb-oz MODE NOT LEGAL FOR TRADE LED Display Displays measured weight and status information. -
Page 4: Setup
CPC-2000 Operation Manual III Setup Installing the AC adaptor Use only the AC adaptor specified for use with the scale. Using the wrong adaptor can damage the scale. Insert the adaptor plug securely into the jack on the back of the scale. - Page 5 CPC-2000 Operation Manual III Setup YCO-1093-04-02...
-
Page 6: Directions For Use
CPC-2000 Operation Manual IV Directions for Use Turning the Scale On and Off ON/OFF Remove everything from the platform surface, and press the key. The display will briefly display five eights. After approximately three seconds, the display will automatically set to zero. -
Page 7: Gross Weighing
CPC-2000 Operation Manual IV Directions for Use Gross Weighing 1) Begin with no load on the scale, the display reading zero, and the gross weight indicator lit. 2) Place the item(s) to weighed on the scale platform. The weight displayed will be the gross weight. -
Page 8: Troubleshooting And Error Messages
CPC-2000 Operation Manual V Troubleshooting and Error Messages The scale can check various functions automatically. When a problem is detected, the following mes- sages will be displayed. If you take the steps described below but the problem is not fixed, the scale needs to be serviced by a qualified scale technician.