Starter Interrupt Harness (H3); Plug-In Led And Valet Program Switch - Directed Electronics 3100 Installation Manual

Starter Interrupt Harness (H3)

1 BLACK
2 BLACK
Use one of these wires as a starter interrupt input and the other as a starter
interrupt output wire
Important:
These two black wires are interchangeable.

Plug-in LED and Valet Program switch

These plug into the control module. The status LED plugs into the white 2-pin
socket, while the valet program switch plugs into the blue 2-pin connector. The
status LED and valet switch each fit into a 9/32 inch hole.
White 2-pin port
4
Starter interrupt input
Starter interrupt output
Control Module
LED
Blue 2-pin port
Control
Module
© 2011 Directed Electronics. All rights reserved.
Valet Program
button