4.2.9 Access Control (ACL)
Operation Mode -> Setup -> Access Control
The AIRMAX5 allows you to define a list of MAC addresses that are allowed or denied to
access the wireless network. This function is available only for Access Point and AP
Router modes.
Disable MAC address control list: When selected, no MAC address filtering will
be performed.
Enable GRANT address control list: When selected, data traffic from only the
specified devices in the table will be allowed in the network.
Enable DENY address control list: When selected, data traffic from the devices
specified in the table will be denied/discarded by the network.
To add a MAC address into the table, enter a Mnemonic Name and the MAC Address,
and then click Add. The table lists all configured MAC Filter entries.
To delete entries, check the corresponding Select boxes and then press Delete Selected.
4. Web Management-Wireless and WAN Settings
51
AirLive AIRMAX5 User's Manual