Configuring The Airmax5; Important Information; Prepare Your Pc - Air Live AIRMAX5 User Manual

3
3.
The AirMax5 offers many different types of management interface. You can configure
through standard web browser (http), secured web (https), command line (telnet), secured
command shell (SSH, SSH2), and SNMP management. In this chapter, we will explain
AirMax5's available management interfaces and how to get into them. Then, we will
provide the introduction on Web Management and recommended initial settings. For
detail explanations on Web Management functions, please go to Chapter 4 and 5. For
Command-Line interface, please go to Chapter 6.

3.1 Important Information

The following information will help you to get start quickly. However, we recommend you
to read through the entire manual before you start. Please note the password and SSID
are case sensitive.
The default IP address is: 192.168.1.1
The default password is:
The default SSID is:
The default wireless mode is : AP mode
After power on, please wait for 2 minutes for AirMax5 to finish boot up
Please remember to enter the correct "Distance" parameter in wireless settings.
Failure to do so can result in poor performance.
The default country code is : United Kingdom.
If you are living outside of EU, please go to Wireless Mode->Setup->Advance
Settings and change the country code.
If you want to your browser to remember your password, please use Mozilla
Firebox to configure AirMax5.

3.2 Prepare your PC

The AIRMAX5 can be managed remotely by a PC through either the wired or wireless
network. The default IP address of the AIRMAX5 is 192.168.1.1 with a subnet mask of
255.255.255.0. This means the IP address of the PC should be in the range of
192.168.1.2 to 192.168.1.254.
To prepare your PC for management with the AirMax5, please do the following:

Configuring the AirMax5

airlive
airlive
Subnet Mask: 255.255.255.0
21
AirLive AIRMAX5 User's Manual
3. Configuring the AirMax5