Table of Contents
Advertisement
Enable 802.1d: Enable the Spanning Tree Protocol to prevent forming a network loop.
This option is especially important for WDS Bridge mode.
Enable 802.11d: Also known as "Global Roaming". 802.11d is a standard for use in
countries where systems using other standards in the 802.11 family are not allowed to
operate.
4.2.14 Access Control (ACL)
Operation Mode -> Setup -> Access Control
The WHA-5500CPE allows you to define a list of MAC addresses that are allowed or
denied to access the wireless network. This function is available only for Access Point
and AP Router modes.
Disable MAC address control list: When selected, no MAC address filtering will
be performed.
Enable GRANT address control list: When selected, data traffic from only the
specified devices in the table will be allowed in the network.
Enable DENY address control list: When selected, data traffic from the devices
specified in the table will be denied/discarded by the network.
4. Web Management-Wireless and WAN Settings
43
AirLive WHA-5500CPE User's Manual
Advertisement
Table of Contents
