Table of Contents
Advertisement
3
The WLA-9000AP offers many different types of management interface. You can configure
through standard web browser (http), secured web (https), command line (telnet), secured
command shell (SSH, SSH2), and SNMP management. In this chapter, we will explain
WLA-9000AP's available management interfaces and how to get into them. Then, we will
provide the introduction on Web Management and recommended initial settings.
3.1 Important Information
The following information will help you to get start quickly. However, we recommend you
to read through the entire manual before you start. Please note the password and SSID
are case sensitive.
Settings
Device Name
Radio
SSID
Channel
WEP
IP Address
Subnet Mask
DHCP Server
DHCP IP Range
Access Password
Note: Before you starting hardware connection, you are advised to find an appropriate
location to place the Access Point. Usually, the best place for the Access Point is at the
Configuring the
3.
WLA-9000AP
Wireless1
WLA-9000AP
802.11a
airlive1
36
Disabled
192.168.1.1
255.255.255.0
Disabled. Available and default enabled when each of
the wireless is configured as a gateway.
192.168.1.2 ~ 192.168.1.254
airlive
11
3. Configuring the WLA-9000AP
Default Value
Wireless2
802.11a
airlive2
36 (auto in 802.11b/g)
AirLive WLA-9000AP User's Manual
Advertisement
Table of Contents
