Table of Contents
Advertisement
3
3 .
The AirMax5 offers many different types of management interface. You can configure
through standard web browser (http), secured web (https), command line (telnet), secured
command shell (SSH, SSH2), and SNMP management. In this chapter, we will explain
AirMax5's available management interfaces and how to get into them. Then, we will
provide the introduction on Web Management and recommended initial settings. For
detail explanations on Web Management functions, please go to Chapter 4 and 5. For
Command-Line interface, please go to Chapter 6.
3.1 Important Information
The following information will help you to get start quickly. However, we recommend you
to read through the entire manual before you start. Please note the password and SSID
are case sensitive.
The default IP address is: 192.168.1.1
The default user's name is: airlive
The default password is:
When using SSH/SSH2, there are 2-levels login
First Level:
Login : root
Password: Nothing, just press enter key
Second Level:
Password: airlive. When you change your password, this will change
also.
The default SSID is:
After power on, please wait for 2 minutes for AirMax5 to finish boot up
Please remember to click on "Apply" for new settings to take effect
Please remember to enter the correct "Distance" parameter in wireless settings.
Failure to do so can result in poor performance.
3.2 Prepare your PC
The AIRMAX5 can be managed remotely by a PC through either the wired or wireless
network. The default IP address of the AIRMAX5 is 192.168.1.1 with a subnet mask of
255.255.255.0.
This means the IP address of the PC should be in the range of
192.168.1.2 to 192.168.1.254.
AirLive AirMax5 User's Manual
Configuring the AirMax5
airlive
airlive
Subnet Mask: 255.255.255.0
16
3. Configuring the AirMax5
Advertisement
Table of Contents
