Terminal Assignment Ex I; Electrical Installation; Emc Notes - Bartec POLARIS Panel PC 19.1" User Manual

User manual
Panel PC 19.1'' and Panel PC 15''
POLARIS
Version 2.00
3.2

Terminal assignment Ex i

Terminal Interface
Scanner connection
(optional)
X1 Hand-held scanner
X2 Supply
X3 Supply
PS/2 interface for input devices
X4 PS2
X5 PS2
X6 PS2
X7 PS2
X8 PS2
X9 PS2
3.3

Electrical installation

3.3.1

EMC notes

This device is class A equipment and may cause interference in domestic
electrical equipment. If this occurs, the installer of the device may be required to
implement appropriate counter measures.
All connection cables must be shielded. This applies both to data lines and to other cables.
The data cables must be twisted in pairs. Example: 2 x 2 x 0.75 mm² LIYCY TP.
If possible, cables for power supply and data must be laid separately.
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc
Colour
WH/BN
GN/YE
PK
GR
BL
RD
User manual for POLARIS Panel PC 19.1" and 15"
Signal Remarks
+UB Supply voltage +5 V
RxD-I Data input RS232 signal
GND Mass connected to protective earth
VCC Supply voltage
GND Mass connected to protective earth
KB_CLK Keyboard clock signal
KB_DATA Keyboard data signal
MS_CLK Mouse
MS_DATA Mouse
Revision 1 / Status: January, 3 , 2006 Technical data subject to change
rd
Page 17 of 46
clock signal
data signal