Display Mode - Equinox Systems Ultra LED Scan EQLED75 User Manual

Equinox Ultra Scan Operation modes
Operation modes cont....

Display mode:

To access the display mode, press the "MODE" button on the LED display to show "Addr" and
use the "UP" and "DOWN" buttons to display "rDIS". Now use the "UP" and "DOWN" buttons to
choose "ON" or "OFF" options.
"ON" option: Selecting this option, the LED display will display the right way up.
"OFF" option: Selecting this option, the LED display will display upside down.
Once you have selected the desired option, press the "ENTER" button a final time.
Reset mode:
To access the reset mode, press the "MODE" button on the LED display to show "Addr" and use
the "UP" and "DOWN" buttons to display "rEST". Now press the "ENTER" button and the unit
will reset itself and return to the last mode it was in.
Loading data mode:
To access the loading data mode, press the "MODE" button on the LED display to show "Addr"
and use the "UP" and "DOWN" buttons to display "LOAD". Now press the "ENTER" button and
the unit will load up data from a DMX source.
DMX chart: