Operation Modes; Sound-Active Mode - Equinox Systems Ultra LED Scan EQLED75 User Manual

Equinox Ultra Scan

Operation modes:

DMX mode:
To access the DMX mode, press the "MODE" button on the LED display to show "Addr". Now
press the "ENTER" button and use the "UP" and "DOWN" buttons to set the desired DMX
address setting from "A001 - A512". Once you have selected the desired DMX address setting,
press the "ENTER" button a final time.
For DMX functions, please refer to the DMX function chart over leaf
Sound active mode:
To access the sound active mode, press the "MODE" button on the LED display to show "Addr"
and use the "UP" and "DOWN" buttons to display "SOUN". Now press the "ENTER" button to
access the mode and use the "UP" and "DOWN" buttons to choose from the two options.
Option 1: "ALON", using this option, the unit(s) will work in sound active mode independently.
Also use this option to set the unit(s) into "SLAVE" mode.
Option 2: "NAST", using this option will set the unit as the "MASTER" fixture when linking
multiple units.
Once you have selected the desired option, press the "ENTER" button a final time. The unit will
now react to the music.
Auto run mode:
To access the auto run mode, press the "MODE" button on the LED display to show "Addr" and
use the "UP" and "DOWN" buttons to display "AUTO". Now press the "ENTER" button to
access the mode and use the "UP" and "DOWN" buttons to choose from the two options.
Option 1: "ALON", using this option, the unit(s) will work in auto run mode independently.
Also use this option to set the unit(s) into "SLAVE" mode.
Option 2: "NAST", using this option will set the unit as the "MASTER" fixture when linking
multiple units.
Once you have selected the desired option, press the "ENTER" button a final time. The unit will
now run through its built-in programmes.
Reverse pan mode:
To access the reverse pan mode, press the "MODE" button on the LED display to show "Addr"
and use the "UP" and "DOWN" buttons to display "rPAN". Now use the "UP" and "DOWN"
buttons to turn this mode "ON" or "OFF". Once you have selected the desired option, press the
"ENTER" button a final time.
Reverse tilt mode:
To access the reverse tilt mode, press the "MODE" button on the LED display to show "Addr"
and use the "UP" and "DOWN" buttons to display "rTIL". Now use the "UP" and "DOWN"
buttons to turn this mode "ON" or "OFF". Once you have selected the desired option, press the
"ENTER" button a final time.
Operation modes