Table of Contents
Advertisement
Operation:
Connect the unit to a mains power supply via a powerCON cable. Then turn the power switch to ON,
the red indication light on the power switch will illuminate.
For manual control simply connect the remote control provided and follow the remote control
operation instructions below.
Remote control operation:
Ensure the remote control switch is off and the output
volume rotary knob is turned counter-clockwise until it
stops.
Connect the handheld remote control to the main unit via
the remote control socket. Once the remote is connected
the red power indicator will illuminate.
Press the switch on the handheld remote control to ON, the
green in use indicator will illuminate.
When you are ready to disperse snow, turn the output
volume rotary knob clockwise to the desired output. To stop
the dispersion of snow turn the output volume rotary knob
counter-clockwise until it stops.
Care should be taken to ensure the fluid level is maintained
and the unit is not allowed to run dry of fluid. Isolate from
the mains supply before disconnecting or reconnecting the
fluid source.
www.prolight.co.uk
01 - Output volume
02 - In use indicator
03 - Power indicator
04 - ON/OFF switch
Avalanche Snow Machine User Manual
Operating instructions
01
02
03
04
7
Advertisement
Table of Contents
