Table of Contents
Advertisement
FTP Enable
User Name
Password
Server
3.6.6 E-mail Setting
User may set up SMTP mail parameters for further operation of Event Schedule. If users want
to send the alarm message out, it will need to configure parameters here and also add at least
one event schedule to enable event triggering.
SMTP Server
SMTP Port
E-mail From
User Name
Password
E-mail To
3.7 Advanced Tool
Click Setup-> Advanced Tool
To enable or disable the FTP service here.
Type the user name for the FTP server.
Type the password for the FTP server.
Type the server name or the IP address of the FTP server.
Type the SMTP server name or the IP address of the SMTP
server.
Set port number of SMTP service.
Type the sender's E-mail address. This address is used for reply
e-mails.
Type the user name for the SMTP server if Authentication is
Enabling.
Type the password for the SMTP server if Authentication is
Enabling.
Type the receiver's e-mail address.
- 43 -
720P Wireless IR PT IP Camera
ICA-W7100
Advertisement
Table of Contents
