Exmark Lazer Z Operator's Manual page 36

Hide thumbs Also See for Lazer Z:
Table of Contents

Advertisement

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
POTENTIAL HAZARD
♦ Engine coolant is toxic.
WHAT CAN HAPPEN
♦ Swallowing coolant can cause poisoning.
HOW TO AVOID THE HAZARD
♦ Do not swallow
♦ Keep out of reach of children and pets.
Drain coolant when engine is cool. Coolant may be drained from the radiator by
loosening the drain cock in the right rear corner. The engine block may be
drained by removing the rear radiator hose and/or by removing the drain plugs
from the engine block.
For 27 HP Kawasaki Liquid-Cooled units: The plug may be accessed from the
bottom left hand side of the engine. The plug may be identified as a hex head
bolt with a black finish. See Figure 5.
a) Re-install all drain plugs and hoses and tighten drain cock.
b) Fill radiator with a 50/50 mix of water and Dex-Cool© coolant (as specified
in Section 2.5.2), allowing some room (approximately 1/2" (12.7 mm)) for
expansion. Add 50/50 coolant mix to overflow bottle on the left side of the
engine as required to bring the level up to the indicator line on the bottle.
POTENTIAL HAZARD
♦ Engine compartment contains open belt drives and fans.
♦ Rotating components can cause injury
WHAT CAN HAPPEN
♦ Fingers, hands, loose clothing, or jewelry can get caught
by the rotating fan and drive shaft.
HOW TO AVOID THE HAZARD
♦ Do not operate machine without the covers in place.
♦ Keep fingers, hands, and clothing clear of rotating
components.
♦ Shut off engine, remove key, and wait for moving parts to
stop before performing maintenance.
e) With the cap off the radiator, tilt hood closed and put the seat down. Start
the engine. Refer to Section 4.3.2. Return the seat up and hood forward to
the open position.
www.mymowerparts.com
CAUTION
FIGURE 5
COOLANT PLUG LOCATION
WARNING
- 31 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents