Wireless Network - EnGenius EAP1750H User Manual

Wireless Network

This page displays the current status of the Wireless
settings of the EAP1750H.
Access Point/WDS AP mode:
Wireless Mode: Supports 802.11b/g/n mixed mode in
2.4GHz and 802.11ac/a/n mixed mode in 5GHz.
Channel HT Mode: The default channel bandwidth is 20/
40MHz in 2.4GHz and 20/40/80MHz in 5GHz. The larger
the channel, the better the transmission quality and speed.
Extension Channel: Select Upper or Lower channel. Your
selection may affect the Auto Channel function.
Channel/Frequency: Select the channel and frequency
appropriate for your country's regulation.
Auto: Check the option to enable the Auto-Channel feature.
RTS/CTS Threshold: Specifies the threshold package size
for RTC/CTS. A small number causes RTS/CTS packets to be
sent more often and consumes more bandwidth.
Client Limits: Limits the total number of clients.
Aggregation: Merges data packets into one packet. This
option reduces the number of packets, but also increases
packet sizes.
AP Detection: AP Detection can select the optimal channel
to use by scanning nearby areas for Access Points.
Current Profile: You can configure up to eight different
SSIDs (4 in WDS AP mode). If multiple client devices will be
accessing the network, you can arrange the devices into
SSID groups. Click Edit to configure the profile and check
whether you wish to enable extra SSIDs.
Save: Click Save to confirm the changes.
2.4GHz/5 GHz SSID Profile
32