Mounting The Eap1750H - EnGenius EAP1750H User Manual

Mounting the EAP1750H

Using the provided hardware, the EAP1750H can be
attached to a ceiling or wall.
To attach the EAP1750H to a ceiling or wall
using the mounting bracket:
1. Attach the mounting bracket to the wall or ceiling using
the provided wall/ceiling mounting hardware kit.
2. Insert the provided short screws into the bottom cover
of the EAP1750H.
P3.5*32 Screw
Wall
Mounting Screw
Mounting Bracket
P2.6*12 Screw
Leave enough of the screws exposed to ensure that the
unit can be attached to the mounting bracket.
If extra space is required, use the provided spacers and long
screws from the T-Rail mounting hardware kit to increase
the space between the unit and the mounting bracket.
3. Mount the EAP1750H on the mounting bracket by
rotating the unit clockwise about 90 degrees to secure it
in place.
Lock the EAP1750H by revolving
16