AMX Enova DVX-2150HD Operation/Reference Manual page 17

Overview
DVX-2150HD/DVX-2155HD Specifications (Cont.)
Rear Panel Components: (Cont.)
CONFIG DIP Switch: 8-position Master configuration DIP switch allows setting the Serial Programming
PROGRAM Port:
ID Pushbutton:
LAN Port:
AxLink Port:
Power Connector:
Operating
Environment:
Supported Video
Resolutions:
Dimensions (HWD):
Weight:
Enclosure:
Certifications:
4
port baud rate and onboard Master execution mode (PRD or normal). See the
CONFIG DIP Switch section on page 29 for more information.
DB9 connector (male) connects to a DB9 serial port on a PC, for serial
communication. This connection is used to configure system settings.
Note: This port is not recommended for firmware updates or large file transfers. Any
large data-intensive operations are better handled via Ethernet.
See the PROGRAM Port section on page 30 for more information.
Black ID pushbutton sets the NetLinx Device ID assignments of the Internal Control
Device. See the ID Pushbutton section on page 31 for more information.
RJ-45 connector provides TCP/IP communication. See the LAN (RJ-45) section on
page 31 for more information.
1 3.5 mm 4-pin captive-wire connector provides data and power to external control
devices. The AxLink LED (green) indicates the state of the AxLink port. The AxLink
port can be used to supply power to downstream AxLink-compatible devices as long
as the maximum current draw is less than 1 Amp.
Note: The AxLink port provides only limited power to connected AxLink devices. It is
recommended to use an alternate power source when connecting AxLink devices to
the DVX-2150HD-SP.
Note: When using the DVX-2150HD-SP with the NXA-PDU-1508-8 power
distribution unit, do NOT connect +12V power from any of the NXA-PDU's AxLink
ports to the AxLink power pin.
See the AxLink Port and LED (4-pin captive-wire) section on page 32 for more
information.
IEC Power cord connector: 100-240V AC, 47-63Hz
• Storage temperature: -10º C to 70º C (14º F to 158º F)
• Operating Temperature: 0º C to 40º C (32º F to 104º F)
• Operating Relative Humidity: 5% to 85% non-condensing
HD resolutions up to 1080p and VGA resolutions up to 1920x1200@60Hz. Higher
resolutions are supported in pass-through mode. See the Available Pixel Display and
Refresh Rates section on page 119 for a complete listing of all supported video
resolutions.
5 3/16" x 17" x 14" (13.2 cm x 43.2 cm x 35.6 cm)
29.2 lb (13.25 kg)
Metal with black matte finish
• FCC Part 15 Class A
• IC CISPR 22 Class A
• C-Tick CISPR 22 Class A
• CE EN 55022 Class A and EN 55024
• LVD EN 60950-1
• IEC 60950-1
• cULus UL 60950-1
Enova DVX-2150HD/2155HD All-in-One Presentation Switcher Operation/Reference Guide