Preamble And Postamble By Esp - Microscan HS-51 User Manual

Preamble and Postamble by ESP

Characters can be added to the beginning and end of data strings using ESP. There are
a few different ways to do this using the interface shown below.
You will see the Communications tree control on the left, and the Preamble/Postamble
interface on the right.
When you type ASCII characters directly into the Preamble
or Postamble text fields and then click Send to Reader,
those preamble or postamble characters are enabled and
will appear in data output.
In addition to typing directly
in the text fields and selecting
from the dropdown menu,
you can also click any of
these preset buttons to set a
preamble or postamble.
HS-51/HS-51X Wireless Handheld Reader User Manual
Save pre- and postamble settings and send
them to the reader.
Scroll through a list of all preamble
and postamble options, and then
click Insert.
Communications
4-11