Table of Contents
Advertisement
Section 6: Features & Benefits
Section 6: Features & Benefits
RCR3596, RCRM3596, RCR3510 & RCRM3510 Models
Features
Surpassed rugged
industry standards
540 or 1000 RPM
Gearbox HP rating
5 Yr. limited gearbox warranty
3 Gearboxes
Splined rubber flex-couplers
between the center and
outboard gearboxes
Pull-type unit
Constant velocity driveline
U-Joint option (RCR3510 only)
Slip-clutch protection
on main driveline
8'- Cat. 1 & 2 or 10'- Cat. 2 & 3
3-Point & Semi-mount Hitches
or Pull-type Hitch
10 Gauge deck, fully welded
1/4" Thick sidewalls
Obstacle free underside
Round back design
Pull-type w/dual leveling rods
Chain or rubber guard option
Full length skids
with replaceable shoes
Splined blade hub
3/16" Round stump jumper
1" x 4" Blade bar
1/2" x 4" Heat-treated blades
2" Diameter cutting capacity
High blade tip speed
Laminated tires on 3-Point
and Semi-Mount
Airplane tires or
Laminated tires on Pull-Type
Quick-Hitch adaptable
Paint Options
8/15/12
Table of Contents
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
Fits wider variety of tractors.
120 HP on center unit and 100 HP on outboard units.
Shows our confidence in the gearbox integrity.
Allows equal torque to be spread to left and right gearbox.
Protects the driveline and gearboxes from hard objects in the blade path.
Reduces chatter and extends life of U-joint during turns.
Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
Fits a wide range of tractors.
Semi-mount and Pull-type fit older tractors without a top link and smaller tractors without
enough lift capacity.
Fully welded deck adds rigidity.
Protects sidewalls from thrown objects.
Underside of deck is free of reinforcement members which tend to allow material to lodge.
Allows for cleaner and efficient discharge of material, helps eliminate damage to rear
corners by not sticking out.
Dual leveling rods eliminate deck twisting when going over uneven terrain.
Reduces flying debris.
Adds reinforcement to side panels. Replaceable shoes allow for change before wearing
through to weld-on piece.
Splined blade hub offers tight non-slipping attachment to output shaft.
Standard stump jumper aids in sliding over obstructions, which helps protect gearbox
output shaft.
Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
Heat-treated blades last longer than non-heat-treated blades.
Aids in cutting brush.
Means cleaner cutting.96" at 540 rpm - 14,223 fpm; at 1000 rpm - 14,442 fpm
10' at 540 rpm - 17,291 fpm; at 1000 rpm - 17,569 fpm
Laminated tires can handle almost any condition.
Airplane tires offer smooth roadability. Laminated tires don't go flat.
3-point and semi-mount are Quick-hitch adaptable.
Choice of red, green, or tan to match popular tractor lines.
RCR3596, RCRM3596, RCR3510 & RCRM3510 Rotary Cutters 312-517M
Benefits
39
Advertisement
Table of Contents
