Table of Contents
Advertisement
Quick Links
Ro ta ry Cu tte rs
RCR2660 and RCR2672
35408
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
312-783M
Operator's Manual
Printed 12/4/18
Advertisement
Table of Contents
Related Manuals for Land Pride RCR2660
Summary of Contents for Land Pride RCR2660
- Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 12/4/18...
-
Page 2: Machine Identification
Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18... - Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
- Page 4 Parts Manual for this equipment. for Land Pride products. Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture.
-
Page 5: Important Safety Information
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident. -
Page 6: Tire Safety
Lower implement to the ground and Replace parts on this implement implement. follow all shutdown procedures with genuine Land Pride parts only. Attach the chain to the tractor before leaving the operator’s seat to Do not alter this implement in a way drawbar support or other specified perform maintenance. - Page 7 Use Seat Belt and ROPS signals are recommended Keep Riders Off whenever driving on public roads. Machinery Land Pride recommends the use of a CAB or roll-over-protective- Never carry riders on tractor or structures (ROPS) and seat belt implement.
-
Page 8: Safety Labels
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com. - Page 9 Table of Contents Important Safety Information 35906 818-556C Danger Thrown Object Hazard 818-564C 35907 Rotating Blade Hazard 818-142C Danger Rotating Driveline 35906 Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M...
- Page 10 Table of Contents Important Safety Information 35408 818-830C Safety Combo 818-540C Danger Guard Missing 24597 818-552C Danger Rotating Driveline 24597 RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18...
-
Page 11: Using This Manual
These units come with a standard 3/16" heavy-duty stump jumper and replaceable skid shoes. The stump jumper on the RCR2660 is 25" round in diameter and the RCR2672 features a 32" round pan configuration. Optional rubber deflectors or chain guard selections are available. -
Page 12: Section 1: Assembly & Set-Up
(#10), and hex flange lock nuts (#9). Tighten they are too stiff to rotate, loosen nuts (#8) until lock nuts (#9) to the correct torque. floating top link (#13) rotates freely. 20955 Hitch Assembly Diagram Figure 1-1 RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18... -
Page 13: Gearbox Vented Dipstick
A vented dipstick is shipped loose and packaged with the too long can damage tractor and implement. Operator’s Manual. Remove temporary solid plug from top of gearbox and replace with vented dipstick. See your nearest Land Pride dealer if dipstick is missing. Remove Install Solid Plug... -
Page 14: Point Hookup
Please consult your tractor’s manual for adjusting NOTE: Land Pride’s Quick Hitch can be attached to instructions. the tractor to provide quick and easy 3-point hook- up and detachment. -
Page 15: Check Driveline Collapsible Length
(“Y1” dimension). hitch and a standard 3-point hitch. More than one Remove all burrs and cuttings. driveline may be required to fit all applications. Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M... -
Page 16: Check Driveline Interference
(#18) over the pivot shaft. Insert 3/8" x 2 1/2" roll pin “Torque Values Chart” on page 34. (#19) into the yoke assembly as shown. Deck Channel 20954 Tailwheel Arm Relocation Figure 1-9 RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18... -
Page 17: Rear Chain Guard
1/2" X 1 1/4" round head bolts (#1), 1/2" flat washers (#2), and 1/2" locknuts (#3). Tighten all nuts and bolts to correct torque. See “Torque Values Chart” on page 34. 20953 Rear Chain Guard Figure 1-12 Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M... -
Page 18: Section 2: Adjustments
Adjust either one or both of the tractor’s lower link height adjustments to level the deck from left to right. Some tractors have only a single adjusting crank. 13831 Deck Leveling Figure 2-1 RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18... -
Page 19: Tractor Center 3-Point Adjustment
This arrangement allows for optimum ground contour following performance. 3. Lock tractor center link in this position once correct length is achieved. Adjustment on center 3-point link can be made depending on customer’s preference. Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M... -
Page 20: Tail Wheel Height Adjustment
(#1) and replace attaching hardware. 4. Lower 3-Point hitch and repeat “Deck Leveling From Front to Rear” on page 14 to be sure the deck is level and top center link is adjusted properly. RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18... -
Page 21: Operating Checklist
20 mph (32.2 km/h) with attached equipment. Rough terrain requires a slower speed. Always shut tractor down using “Tractor Shutdown • Procedure” provided in this manual before dismounting tractor. Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M... -
Page 22: Section 3: Operating Instructions
5. Check driveline to make certain it is securely connected to the tractor power take-off shaft and cutter gearbox shaft. 6. Check driveline guards to make certain they are in good condition and in place. RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18... -
Page 23: Blade Engagement & Disengagement
Stay on tractor until blades have come to a complete stop. 5. Shift tractor to a lower gear when traveling over rough or hilly terrain. Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M... -
Page 24: Field Operation
Frequently inspect cutter for loose bolts and nuts. Tighten all loose bolts and nuts as indicated in the “Torque Values Chart” on page 34. 8. For additional information, see “General Operating Instructions” on page 21. RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18... - Page 25 With a little practice you will be to check for driveline bind or chatter. Lower the cutter to pleased with what you and your Land Pride RCR26 the ground, return the engine to a low idle, and disengage Series Rotary Cutter can do.
-
Page 26: Section 4: Options
Stop blade rotation if someone is in or around the area. Land Pride offers two types of front guards to best suit your application. They are the rubber skirt guard and chain skirt guard. - Page 27 See “Check Chain Option” on page 13 for proper installation. Part Number & Description 20959 312-071A Check Chain Assembly Chain Check Option Figure 4-4 Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M...
-
Page 28: Section 5: Maintenance & Lubrication
6. Blade bolt (#1) is keyed and will not turn freely. method. Always replace blades with new Land Pride blades Unscrew locknut (#5) and remove cutting blade (#2). to assure safety. -
Page 29: Driveline Protection
BLADE BOLT KIT (Includes items 1, 4, & 5 below) 802-277C BLADE BOLT 1 1/8-12 x 3 7/16 WITH KEY 820-137C RCR2660 BLADE 1/2 x 4 x 25 CCW 820-168C RCR2672 BLADE 1/2 x 4 x 29 CCW 312-820H RCR2660 15 DISHPAN WELDMENT... - Page 30 Install bolts (#3) through the end plates and intermediate plates as shown. Place springs (#2) over bolts (#3) and secure with nuts (#1). Progressively tighten each spring retainer bolt until correct spring height “A” dimension is obtained. RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18...
-
Page 31: Skid Shoe Maintenance
There are two skid shoes mounted on the cutter sides. area to minimize oxidation. Check both skid shoes for wear and replace if necessary. Order only genuine Land Pride parts from your local Land 2. Check blades and blade bolts for wear and replace if Pride dealer. - Page 32 14618 Hours Driveline U-Joints Type of Lubrication: Multi-purpose Grease Quantity = 6 pumps 13755 Hours Driveline Shield Bearings Type of Lubrication: Multi-purpose Grease Quantity = 6 pumps 13755 RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18...
- Page 33 The hub should be greased until grease purges from the relief hole. 13753 Type of Lubrication: Multi-purpose Grease Quantity = Until grease purges from the relief hole Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M...
-
Page 34: Section 6: Specifications & Capacities
Welded arm and Caster Fork Tailwheel 4.00 x 8 x 15 Laminated Tire with cast iron hub and tapered roller bearings Front Guard Optional: Chain Guard Available through Parts Department: Rubber Guard Rear Guard Optional: Chain Guard RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18... - Page 35 Table of Contents Section 6: Specifications & Capacities 27559 Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M...
-
Page 36: Section 7: Features & Benefits
Section 7: Features & Benefits RCR2660 and RCR2672 Models Features Benefits Surpassed rugged All Land Pride cutters have been designed and tested and meet rigorous voluntary testing industry standards procedures specified by ANSI. 5 Year gearbox warranty Shows Land Pride’s confidence in gearbox integrity. -
Page 37: Section 8: Troubleshooting
Driveline bent Replace driveline Blades loose Tighten blade bolts Blade carrier bent Replace blade carrier Blade broken Replace blade Blade will not swing Remove and inspect blade Blades have unequal weight Replace both blades Rotary Cutters 12/4/18 RCR2660 and RCR2672 312-783M... -
Page 38: Torque Values Chart For Common Bolt Sizes
4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. Additional Torque Values Blade Bolt Locknut 450 ft-lbs Blade Carrier Hub Nut 450 ft-lbs Minimum RCR2660 and RCR2672 Rotary Cutters 312-783M 12/4/18... -
Page 39: Warranty
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship. - Page 40 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...