Table of Contents
Advertisement
Important Safety Information
Safety Labels
Your Rotary Cutter comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1.
Keep all safety labels clean and legible.
2.
Replace all damaged or missing labels. Order new labels
from your nearest Land Pride dealer. To find your nearest
dealer, visit our dealer locator at www.landpride.com.
3.
Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
4
RCR3596, RCRM3596, RCR3510 & RCRM3510 Rotary Cutters 312-517M
Table of Contents
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a.
Clean the area the label is to be placed.
b.
Spray soapy water on the surface where the label is to
be placed.
c.
Peel backing from label. Press firmly onto the surface.
d.
Squeeze out air bubbles with the edge of a credit card
or with a similar type straight edge.
16242
16242
16242
818-130C (Shown)
Caution 540 RPM
818-240C
Caution 1000 RPM
838-062C
Amber Reflector
818-335C
Red Reflector
8/15/12
Advertisement
Table of Contents
