Setting Up Trifecta - Bunn Trifecta MB Use & Care Manual

IMpORTANT: trifecta has an internal Hot water tank that must be filled with water before first use.
1
Plug the unit into a standard 110V electrical outlet.
NotE: the brew button and Reservoir Lights will alternately flash indicating that
the Hot water tank needs to be filled.
2
Insert brew Chamber by lifting the Latch, press the brew
Chamber into Air Infusion Nozzle at the base of the brew
Chamber Platform and close the Latch.
Pour in another 12 ounces and wait for the water level to stabilize.
water to the proper temperature. the brew button will begin to
flash. when the brew button light stays solid blue trifecta Mb is ready to use.
hIGh ALTITUdE pROGRAMMING: water boils at a lower temperature in high
altitude environments (over 4,000 feet). to program trifecta for use at high altitude,
remove the brew Chamber and press the brew button 5 times quickly (within five
seconds). the brew button Light will quickly flash 5 times to indicate the brewer is
programmed for high altitude use. to return trifecta to normal operation, remove
the brew Chamber and press the brew button 5 times (in under 5 seconds). the
brew button Light will quickly flash 10 times to indicate the brewer is programmed for
regular altitudes.
NotE: High Altitude Programming can only be done after setup is completed and trifecta
Mb is ready to use.
trifecta MB coffee and tea Brewer
®

SETTING Up TRIFECTA

Remove Lid on water Reservoir and pour in cold water
to the top 12 ounce mark. wait as the water level drops
and the water Reservoir empties completely.
Add water to fill the water Reservoir to the top 12
ounce mark. Place a cup with 12 ounce capacity
or the brew Pitcher under the brew Chamber and
press the brew button.
water will automatically pump from the water
Reservoir through the internal Hot water tank and
into the brew Chamber. then the water in the brew
Chamber will press out into the cup or brew Pitcher.
Repeat step 3 by emptying the cup or brew Pitcher
and fill the water Reservoir again. Press the brew
button.
After the water presses out the
second time, you should begin to
hear the sound of the heater bringing
3