Alarm Setting - Tecsun S-2000 Owner's Manual

3. While it's flashing, adjust the time that the radio is to play (1~90 minutes) with the TUNING
knob and press the TIMER A or B ON/OFF button with a long "B--"sound or simply let the
flashing number time-out to confirm it automatically.
After the alarm setting, it will auto start the alarm by radio
note that " " appears on the display.
Note:
You can also use the up or down (
hour and minute instead of the TUNING knob.
SELECT ALARM BY RADIO OR BY BUZZER
The TECSUN S-2000 has two alarm modes, alarm by radio
or by buzzer.
1. To activate the alarm by radio, press TIMER A or B ON/OFF
once with a "B" sound and notice that the "
up in the TIMER A or B display section.
2. To activate the alarm by buzzer, press again the TIMER A or B
ON/OFF with a "BB" sound and notice that the "
appears in the TIMER A or B display section.
3. Press again the TIMER A or B ON/OFF button with a long "B--"
sound and notice nothing appears in the TIMER A or B display
section to turn off the alarm.
Note:
1. Once the alarm is activated, no matter whether the radio is on or off, the alarm will force to
listen to the station that stored in TIMER A or TIMER B, or to make a sequential sound by the
buzzer, and turn off the radio in the time presetting in TIMER A or TIMER B.
2. In "Timer A" or "Timer B" section:
" " Means timer is set by radio
" " Means timer is set by buzzer.
" " Means Timer is off.
TO TURN OFF THE ALARM
Once the alarm is on by radio or buzzer, only the POWER, SLEEP, LIGHT/SNOOZE, and RESET
buttons can be operated. Press the POWER or SLEEP buttons to turn off the alarm.
/ ) buttons to adjust the hour and minute or direct key in
" symbol shows
" symbol
15
To activate the alarm by radio
To activate the alarm by radio
To activate the alarm by buzzer