Clock Setting; Setting The Alarm Time - Tecsun PL-365 Operation Manual

TECSUN RADIOS AUSTRALIA
SETTING THE CLOCK
1. Long press the [TIME] button until you see the hour
flashing. Rotate the [TUNING] knob to set the correct
hour, then short press the [TIME] button and notice the
minutes are flashing.
2. While it's flashing turn the [TUNING] knob to set the
correct minutes, then press [TIME].

SETTING THE ALARM TIME

1. Press & hold the [ALARM] button until both "HOUR" and
"AL" are flashing on the display; rotate the [TUNING]
knob to adjust the hours, then press the [ALARM] button
to adjust the minutes.
2. Rotate the [TUNING] knob to adjust the minutes and
press the [ALARM] button; the "
the display.
3. Rotate the [TUNING] knob to select the time
(1-90 minutes) after which the alarm should automatically
turn off.
4. Press the [ALARM] button to confirm; the alarm symbol
" " appears on the display.
5. To turn off the alarm, press the [ALARM] button until the
alarm symbol "
Setting the alarm by radio
1. Turn on the radio and tune to your preferred radio station.
Please set the volume to a suitable alarm level.
2. Short press [MEM.] button and notice the PRESET
number flashing in the upper right corner of the display.
3. While flashing, press the [ALARM] button. The alarm
symbol "
station is now set.
24/9 Powells Road, Brookvale, NSW 2100 Australia
Email: info@tecsunradios.com.au
" disappears.
" briefly appears on the display. The alarm
12
" symbol flashes on
SLEEP
Ph: +61 2 9939 4377
www.tecsunradios.com.au
T
S
M
T
s
b
T
(e
fl
d
ru
ru
h
k
T
M
M
N
W
p
W
s
b