S-2000 Quick Start Guide - Tecsun S-2000 Owner's Manual

S-2000 QUICK START GUIDE

TIME SETTING
S-2000's clock is in 24 hours format and can be set with the radio on or off. When the radio is
turned off, the clock shows in mid-display. When the radio is turned on, the clock shows in the
upper right corner of the LCD.
To set the clock:
1. Press the TIME button with a "B" sound until the hour is flashing.
2. While it's flashing turn the TUNING knob to set the correct number of hours; then press the
TIME button again with a "BB" sound and the minutes are flashing.
3. While it's flashing turn the TUNING knob to set the correct number of minutes; then press TIME
to confirm, and release it after a long "B--" sounds.
Note:
1. After setting the hour or minutes, you can simply let the flashing number time-out, without
pressing the TIME button to confirm the setting.
2. You can use the
ALARM SETTING
There are two independently programmable alarm timers (TIMER A ON/OFF & TIMER B ON/OFF)
to turn it on and off at the specified time.
To set for TIMER A ON/OFF:
1. Press the TIMER A ON/OFF button with a "B" sound until you see the alarm hour flashing. While
it's flashing adjust the hour with the TUNING knob and press the TIMER A ON/OFF button with a
"BB" sound. Notice that the alarm minutes are flashing.
2. While it's flashing adjust the alarm minutes with the TUNING knob and press the TIMER A
ON/OFF button. Notice the sleep timer flashing in the box at the top of the display.
3. While it's flashing turn the TUNING knob to adjust the time that the radio is to play(1~90 minutes).
4. Press the TIMER A ON/OFF button again to confirm setting, or simply let the flashing number
time-out to confirm it automatically meanwhile with a long "B--" sounds.
5. To set for TIMER B ON/OFF is the same as for TIMER A ON/OFF.
Note:
Once the alarm is on (by radio or buzzer), only the POWER, SLEEP, LIGHT/SNOOZE, and RESET
buttons can be operated. Press the POWER or SLEEP buttons to turn off the alarm.
Alarm by Buzzer or Radio:
Press on TIMER A ON/OFF key to select "
buzzer.
Note:
In TIMER A or B section, "
buzzer, and [ ] means TIMER is off.
/ buttons or direct input the numbers to set the clock.
" means TIMER is set by radio; "
" in TIMER A section. Now the alarm will be on by
5
" means TIMER is set by