Live Record A Call - Cisco 7945G User Manual

Alternate Methods to End a Conference Call
Call initiators can one of the following methods (functionality will vary according to your system configuration):
• To end the conference and remain connected to the most recent call, press the Confrn soft key. The older call is placed on
hold.
• To disconnect from the conference, hang up the handset. The other parties remain on the conference call.

Live Record a Call

Call initiators can use the LiveRcd soft key to record an active call, private line or conference call. To record a call:
1. Press the LiveRcd. This puts the other party on-hold and initiates a call to the configured live record number.
2. Press the LiveRcd again to stop the recording.
Join a Shared-Line Call (SCCP)
User can join a call on a shared line using the cBarge softkey.
To join the shared-line calls:
1. Highlight the remote-in-use call that you want to join.
2. Press the more to navigate to cBarge and press cBarge.
Join a Shared Line Call (SIP)
User can join a non-private call on a shared line call by using either Barge or cBarge soft keys.
• Barge allows you to add yourself to the call by hosting the conference on your phone and does not allow others to join the
conference.
• cBarge allows you to add yourself to the conference and allows others to join the conference.
To join a shared line call:
1. Highlight the remote-in-use call that you want to join.
2. Press Barge or cBarge to join the call.
Tips
When you Barge a call, other parties hear a beep announcing your presence. You are disconnected from a call that you
–
have joined using Barge if the call is put on hold, transferred, or turned into a conference call by the Barge initiator.
If a phone that is using the shared line has Privacy enabled, call information and Barge/cBarge soft keys do not appear
–
on the other phones that share the line.
Hold a Shared-Line Call (SIP)
User can put calls on a shared line on hold like calls on a non shared line.
To place a call on hold while on a shared-line call:
• Highlight the call that you want to put on hold.
• Press the Hold soft key.
Resume a Shared Line Call (SIP)
User can resume a non-private call placed on hold on a shared line call.
To resume a shared line call:
1. Highlight the call that you want to resume.
2. Press Resume to resume the call.
12