Face Installation And Removal - Travis Industries 21 TRV Green Smart 2 Owner's Manual

18

Face Installation and Removal

The face has hooks that hold it in place. Make sure the face locks in place when installing.
PLATED SURFACES:
Make sure the plated surfaces are clean before starting
the fireplace. Any marks left on plated surfaces may
become etched in place. Clean plated surfaces with
denatured alcohol and a soft cloth.
© Travis Industries
Maintenance
4121022
b
Lift and rotate the face forward
until the top brackets lock into the
upper slots.
a
Tilt the face back
and insert the
bottom brackets
into the lower
slots until they
lock in place.
100-01305