OPERATION
MACHINE SETUP
PREPARING MACHINE FOR READYSPACE
CLEANING
1. Park the machine on a level surface and remove
the key. Make sure the scrub head is in the raised
position.
2. Remove the idler plates from the scrub head
(Figure 6).
3. Install the ReadySpace rollers and re-fasten the
idler plates (Figure 7).
ReadySpace
Rollers
4. Connect the green ReadySpace vacuum hose to
the recovery intake connector (Figure 8).
10
Idler plate
FIG. 6
FIG. 7
Green Hose --
ReadySpace
Cleaning
FIG. 8
Home
Find... Go To..
PREPARING MACHINE FOR RESTORATIVE
EXTRACTION CLEANING
FIRST TIME USE: See PRIMING SOLUTION
SYSTEM on page 24.
1. Park the machine on a level surface and remove
the key. Make sure the scrub head is in the raised
position.
2. Remove the idler plates from scrub head
(Figure 9).
3
Install the extraction brushes and re-fasten the idler
plates (Figure 10). NOTE: The brush end with the
letter " I " indicates idler plate end. The "I" should
face outward.
Extraction
Brushes
4. Connect the blue extraction vacuum hose to the
recovery intake connector (Figure 11).
Idler plate
FIG. 9
" I "
Idler
plate
end
FIG. 10
Blue Hose --
Extraction
Cleaning
FIG. 11
Tennant R14 (09- -06)