Recovery Tank Full Indicator; Battery Charge Level Indicator; Fault Indicator; Hour Meter - Tennant ReadySpace R14 Operator's Manual

OPERATION

RECOVERY TANK FULL INDICATOR

The recovery tank full indicator light will come on when
the recovery tank is full (Figure 26). When the light
comes on, the operator will have one minute to
continue scrubbing. After one minute, the scrubbing
function becomes disabled. Drain the recovery tank at
this time. See DRAINING AND CLEANING TANKS on
page 17.
Empty recovery tank

BATTERY CHARGE LEVEL INDICATOR

The battery charge level indicator displays the charge
level of the batteries. When the batteries are fully
charged, all five indicator lights will glow (Figure 27). As
the batteries discharge, the indicator lights will begin to
go out from right to left.
When the discharge level reaches the red light, stop
scrubbing and recharge the batteries. If the red light
begins to blink, the cleaning function will automatically
shut off to protect the batteries from total discharge.
The machine will still propel when light is blinking. Drive
machine to charging station and recharge batteries.
14
FIG. 26
FIG. 27
Home Find... Go To..

FAULT INDICATOR

The fault indicator light will come on if the machine
detects a fault (Figure 28). Refer to the FAULT
INDICATOR LIGHT/BEEP CODES on page 15 to
determine the machine fault.

HOUR METER

The hour meter records the number of hours the
machine has been powered on. This information is
useful for servicing the machine. The meter is located
under the seat (Figure 29).
Machine fault
FIG. 28
FIG. 29
Tennant R14 (09- -06)