Tennant ReadySpace R14 Operator's Manual page 21

3. Clean the underside of the scrub head and the idler
plate (Figure 51).
4. Remove the covers from the ReadySpace vacuum
shoes and wipe out the debris build up (Figure 52).
Remove the ReadySpace rollers and use a pointed
object to clean vacuum shoe intake slot.
5. Remove the extraction vacuum shoes and rinse out
the debris buildup (Figure 53). Use a pointed object
to clean the vacuum shoe intake slot. (See Figure
54 for Extraction Vacuum Shoe Removal.)
Tennant R14 (09- -06)
FIG. 51
FIG. 52
FIG. 53
Home Find... Go To..
Extraction Vacuum Shoe Removal (Figure 54):
a. With the scrub head in the up position, remove
the two down pressure springs. Lower the
scrub head after removing springs.
b. Disconnect the vacuum hose.
c. Pull the two mounting pins
d. Remove shoe from scrub head.
a.
c.
FIG. 54
OPERATION
b.
d.
21