Warning Labels; Machine Setup And Operation - Tennant V-WD-24P Operator's Manual

EN

WARNING LABELS

The warning labels appear on the machine in
the location indicated. Replace labels if they
becomes damaged, illegible or if missing.
8 TENNANT V-WD-24P
MACHINE
OPERATION
1. Before operating, attach the cord restraint
to the handle and loop the extension cord
through the cord restraint as shown.
WARNING:
restraint hook to prevent risk of an
electrical hazard.
2. Inspect power cords for damage before
each use. Replace cords immediately if
damaged.
3. Connect the supplied extension cord into
a grounded 3 hole electrical outlet. No
adapter should be used with the machine.
Do not remove, bend or modify ground pin.
Do not use additional extension cords.
Grounded
3 Hole Outlet
Grounding Pin
4. Connect the vacuum hose to the machine
5. Select desired accessory tool and connect
it to the vacuum hose.
SETUP AND
Always use cord