Fault Indicator Light/Beep Codes - Tennant ReadySpace R14 Operator's Manual

FAULT INDICATOR LIGHT/BEEP CODES

The fault indicator light will come on or the horn will beep if the machine detects a fault.
Use the following fault codes to determine cause of fault.
2
3
4
REF. FAULT LIGHT CODE
1 Fault light blinks
1 & 2 Fault light and Speed (+) light
blink
1 & 3 Fault light and Solution light blink
1 & 4 Fault light and Extract light blink
1 & 5 Fault light and Brush pressure (+)
light blink
1 & 6 Fault light and Brush pressure (--)
light blink
FAULT BEEP CODE
Horn repeatedly beeps two times
Horn repeatedly beeps four times
Horn repeatedly beeps five times
Horn repeatedly beeps six times
Horn repeatedly beeps seven times
Horn repeatedly beeps eight times
Horn repeatedly beeps nine times
Tennant R14 (12- -06)
5
6
FAULT
Propel motor overload
Exceeded maximum incline
Rear brush motor overload
Front brush motor overload
Vacuum motor overload
Scrub head actuator overload
Extractor shoe actuator overload
FAULT
Propel pedal depressed without
operator in seat
Key switch turned on with propel
pedal depressed
Throttle system failure
Brake system failure
Parking brake system failure
Emergency stop button activated
Key switch turned on with battery
charger plugged into machine
Home Find... Go To..
OPERATION
Fault indicator light
1
SOLUTION
Avoid steep inclines. Restart key
to reset. Contact Service Center.
Inspect brush for obstruction.
Contact Service Center.
Inspect brush for obstruction.
Contact Service Center.
Contact Service Center.
Contact Service Center.
Contact Service Center.
SOLUTION
Operator must be seated to operate
machine
Release propel pedal before turning
key on
Contact Service Center
Contact Service Center
Contact Service Center
Turn button clockwise and restart key
to reset
Unplug battery charger before start-
ing machine
15