After Every 80 Hours Of Use - Tennant ReadySpace R14 Operator's Manual

OPERATION

AFTER EVERY 80 HOURS OF USE

1. Empty the solution tank and remove the solution
tank filter from under the machine and rinse out the
screen (Figure 55).
2. Remove the two Restorative Extraction spray
nozzles and soak the tips and screens in an acetic
acid solution (Figure 56). Use a plastic bristle brush
to clean clogged spray tips. Do not use a pointed
object to clean tips, damage will occur.
When replacing the extraction spray nozzles, turn
the cap until it clicks into position. The position of
the spray nozzles is set at a 3° angle (Figure 57).
Restorative extraction spray pattern
TOP VIEW
22
FIG. 55
Restorative Extraction
Spray Nozzle
WHITE CAP
TIP #11005E
p/n 1022378
acetic acid
solution
FIG. 56
3 °
Spray nozzle angle
FIG. 57
Home Find... Go To..
3. Remove the two ReadySpace spray nozzles and
soak the tips in an acetic acid solution (Figure 58).
Use a plastic bristle brush to clean clogged spray
tips. Do not use pointed objects to clean tips,
damage will occur.
ReadySpace Spray Nozzle
GREEN CAP / TIP #11002 p/n 575283000
When replacing the ReadySpace spray nozzles,
turn the cap until it clicks into position. The position
of the spray nozzles is set to spray directly
between the two rollers (Figure 59).
ReadySpace Spray Pattern
ReadySpace Rollers
4. Remove the two ReadySpace vacuum shoe flush
lines and soak them in an acetic acid solution
(Figure 60). Do not remove the tips from the flush
lines.
NOTE: During ReadySpace operation the flush line
spray tips will spray every 2
Push retainer tab upward
to release spray tip.
acetic acid
solution
FIG. 58
FIG. 59
1
/ minutes for 3 seconds.
2
FIG. 60
Tennant R14 (09- -06)