Print Is Too Dark - Develop ineo 4000P User Manual

Action
Step 1
Measure the distance between the
defects.
Check for a distance between
the defects that equals:
- 97 mm (3.82 in.)
- 47 mm (1.85 in.)
- 38 mm (1.5 in.)
Is the distance between defects
equal to one of the listed
measurements?
Step 2
Replace the imaging unit, and then
resend the print job.
Do the repeating defects still
appear?

Print is too dark

User's Guide
Yes
Go to step 2.
Contact technical support.
- 191 -
No
1. Check if the distance between
the defects equal to 80 mm
(3.15 in.)
2. Take note of the distance, and
then contact technical
The problem is solved.
support.