3-Additional Printer Setup; Installing Internal Options; Available Internal Options; Accessing The Controller Board - Develop ineo 4000P User Manual

3—Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic
components or connectors.

Available internal options

• DDR3 DIMM
• Flash memory
- Fonts
- Firmware
• Forms Barcode
• IPDS

Accessing the controller board

Access the controller board to install internal options.
See Accessing the controller
User's Guide
board.
- 17 -