Sending Images Automatically (Image Sync)
Images on the memory card that have not been transferred already can
be sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Preparing the Camera
Register [ ] as the destination. On the destination computer, you will
install and configure Image Transfer Utility, free software compatible with
Image Sync.
1
Add [ ] as a destination.
●
Add [ ] as a destination, as described in
"Registering CANON iMAGE GATEWAY"
( = 17).
●
To include a Web service as the
destination, log in to CANON iMAGE
GATEWAY ( = 16), select your camera
model, access the Web service settings
screen, and choose the destination
Web service in Image Sync settings.
For details, refer to CANON iMAGE
GATEWAY Help.
2
Choose the type of images to send
(only when sending movies with
images).
●
Press the
[Wireless settings] on the [ 4] tab, and
then choose [Wi-Fi Settings].
●
Press the
Sync], and then choose [Stills/Movies].
button, choose
/
buttons to choose [Image
Preparing the Computer
Install and configure the software on the destination computer.
1
Install Image Transfer Utility.
●
Install Image Transfer Utility on a
computer connected to the Internet
( = 40).
●
Image Transfer Utility can also be
downloaded from the Image Sync
settings page of CANON iMAGE
GATEWAY ( = 26).
2
Register the camera.
●
Windows: In the taskbar, right-click [
and then click [Add new camera].
●
Mac OS: In the menu bar, click [
then click [Add new camera].
●
A list of cameras linked to CANON
iMAGE GATEWAY is displayed. Choose
the camera to send images from.
●
Once the camera is registered and the
computer is ready to receive images, the
icon changes to [
Wireless Features/Accessories
Wireless Features
Accessories
Learning About the Camera
Setup and Basics
Shooting
Playback
Settings
],
Troubleshooting
], and
Errors and Warnings
Appendix
Index
].
26