How to install your oven
Housing
NB
The oven may be housed either under
a work surface or built into a column
that is open* or closed with a suitable
opening.
Your oven works at its best and produces
excellent results when cooking and
cleaning itself, if its air circulation is not
compromised:
• The oven must be centred in the unit so
that there is a minimum distance of 5 mm
between it and the surrounding unit.
• The housing unit or its outer surface must
be capable of withstanding heat.
• To ensure the oven rests firmly in the
housing, screw it to the housing unit using
the holes on the side uprights provided
(see diagram).
To do this:
1
Remove the rubber stoppers
masking the fixing holes.
2
To prevent the housing unit
splintering, drill two holes 3 mm in
diameter in the wall of the housing
unit opposite the fixing holes.
3
Attach the oven using the two
screws.
4
Conceal the hole using the rubber
stoppers. (These also help to
cushion the closing of the oven
door).
(*) If the housing unit is open at the back, the gap
must not be more than 70 mm.
18
450
550 mini
560
50
20
400
550
26
450
592
560