How To Install Your Oven - Asko OS8440 Instructions For Use Manual

How to install your oven

Electrical
connection
For a permanent connection, make sure a
system of disconnection that complies
with the installation regulations. The
appliance must be placed in such a way
as to leave the plug
accessible if it is flush-fitted.
Use of an earthed power socket,
connected in compliance with current
safety standards
Your installation must be fitted with a 10
amp device for thermal protection.
Do not use the oven if the supply cord or
its plug are damaged. In this case, they
must be replaced by the manufacturer, its
after-sales service or similarly
qualified persons, to avoid any danger.
Operating voltage ............................................................. 220-240 V ~ 50 Hz
Total power of oven .......................................................................... 2,78 kW
Energy consumption
-Heating to 100°C and maintaining temperature for 1 hour ............... 0,71 kWh
Inside dimensions of oven
Width .............................................................................................. 38,5 cm
Height ............................................................................................. 18,2 cm
Depth .............................................................................................. 33,5 cm
Usable volume ............................................................................. 23,5 litres
17