System Settings - Pioneer Super Tuner IIID MVH-P8200BT Operation Manual

Section
lID (
Operating this unit
II] Press
M.e.
to display the setting mode,
I1J
Turn M.e. to adjust the level.
Adjustment range: 0 to +6
llJ
Press M.e. to confirm the selection,
When you do not want low sounds from the subwoo-
fer output frequency range to play from the front or
rear speakers. turn on the HPF (high pass filter), Only
frequencies higher than those in the selected range
are output from the front or rear speakers,
OJ
Press
M.e.
to display the setting mode.
I1J
Turn
M.e.
to select the cut-off frequency,
Off (0ff)-SOHz-63Hz-80Hz-100Hz-125Hz
llJ
Press
M.e.
to confirm the selection,
SLA (Source Level Adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources,
• When selecting FM as the source. you cannot
switch to SLA.
• Settings are based on the FM volume level, which
remains unchanged,
Before adjusting source levels, compare the FM
volume level with the level of the source you wish
to adjust.
• The AM volume level can also be adjusted with
this function
[iJ
Press
M.e.
to display the setting mode,
[2] Push M.e. up or down to adjust the source vo-
lume,
Adjustment range: +4 to-4
• Notes
• You cannot select
Custom1
and
Custom2
when using the auto-equalizer.
• Operation is complete even if the menu is can-
celled before being confirmed,C!J
00
En
)
System settings
1 Display the system menu.
Refer to Basic menu operations on page 12.
2 Turn M.e. to select the system function.
After selecting, perform the following proce-
dures to set the system function,
LU
Press
M.e.
to display the guide information.
Refer to About guide information on page 13.
II]
Press
M.e.
to display the setting mode,
I1J
Press M.e. to select the segment of the clock dis-
play you wish to set.
Day-Month-Year-Hou r-M inute-AM/PM
LIJ
Turn
M.e.
to set the date and time.
OJ
Press
M.e.
to display the setting mode.
rn
Turn M.e. to select the function to be adjusted.
Press to select.
Brightness-Contrast-Color-Hue-Dimmer
-Temperature-Black Level
For details about the settings, refer to Changing
the picture adjustment on page 39,
When you select
Black Level,
press
M.e.
to turn
the setting on or off.
I)]
Turn M.e. to increase or decrease the level of the
selected item.
Adjustment range: +24 to -24
• Dimmer
can be adjusted from
+48 to
+1,
• Temperature
can be adjusted from +3 to -3 .
You can switch the display language for the warning
message of the parking brake interlock.
OJ
Press M.e. to display the setting mode,
[1] Turn
M.e.
to select the desired setting.
English-Fran~ais-Espai'iol
llJ
Press M.e. to confirm the selection.