Download Print this page
Pioneer DEH-S4200BT Firmware Update Instruction

Pioneer DEH-S4200BT Firmware Update Instruction

Hide thumbs Also See for DEH-S4200BT:

Advertisement

Quick Links

System Firmware Update Instructions for Pioneer Audio Receivers
( DEH-S4200BT, DEH-S4220BT, DEH-S5200BT, DEH-S6200BS, DEH-S6220BS DEH-S7200BHS,
FH-S520BT, FH-S52BT, FH-S720BS, FH-S722BS, MVH-S320BT, MVH-S322BT, MVH-S420BT,
MVH-S522BS, MVH-S620BS, MVH-S622BS, and MVH-S720BHS)
This firmware update (version 08.14, 18.03, or 28.03) applies only to the following models of Pioneer
products sold in the United States and Canada. Installation on any other product could cause
irreversible damage.
DEH-S4200BT
DEH-S7200BHS
MVH-S320BT
MVH-S622BS
IMPORTANT
Please download and print these firmware update instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and, in the order, described below.
Note: If you have any questions, please contact Pioneer Customer Service toll free at 1-800-421-1404,
Monday through Friday, 7:30 AM - 11:30 AM and 12:30 PM - 4:00 PM (Pacific Time), excluding holidays, or
by email through parts.pioneerelectronics.com/contact.
In order to perform this update, the following items are needed:
Pioneer CD receiver listed above.
A USB storage device meeting the following requirements.
-
2 GB or larger in capacity, formatted to FAT32
-
Blank (should not contain any files)
CAUTION: DO NOT turn your unit off or eject the USB storage device while the firmware is being
updated. Any interruption to the firmware update process could cause irreversible damage to the
unit.
WARNING: Install this update only when the vehicle is safely parked in an open, well-ventilated area,
such as an outdoor parking lot, where you can safely keep the engine running to maintain power to the
battery. NEVER RUN YOUR VEHICLE'S ENGINE IN AN ENCLOSED SPACE, WHICH CAN QUICKLY
FILL UP WITH TOXIC CARBON MONOXIDE GAS, LEADING TO SERIOUS INJURY OR DEATH.
Checking the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number of the
firmware. The update version to download and install will depend on the existing firmware version
on your unit.
DEH-S4220BT
DEH-S5200BT
FH-S520BT
FH-S52BT
MVH-S322BT
MVH-S420BT
MVH-S720BHS
DEH-S6200BS
DEH-S6220BS
FH-S720BS
FH-S722BS
MVH-S522BS
MVH-S620BS

Advertisement

loading

Summary of Contents for Pioneer DEH-S4200BT

  • Page 1 FH-S520BT, FH-S52BT, FH-S720BS, FH-S722BS, MVH-S320BT, MVH-S322BT, MVH-S420BT, MVH-S522BS, MVH-S620BS, MVH-S622BS, and MVH-S720BHS) This firmware update (version 08.14, 18.03, or 28.03) applies only to the following models of Pioneer products sold in the United States and Canada. Installation on any other product could cause irreversible damage.
  • Page 2 Your unit's current firmware version Update version 08.XX (Lower than 08.11) 08.14 18.XX (Lower than 18.02) 18.03 28.XX (Lower than 28.02) 28.03 Procedure: Start the vehicle engine (in an open, well-ventilated area). If AV Source is On, Press and hold SRC/OFF to set the unit Source OFF. Press M.C.
  • Page 3 Updating the firmware on your Unit IMPORTANT • DO NOT perform this firmware update if the model number of your Pioneer product is anything other than one of the above models. • Ensure that the update file is located within the root (top) folder of your USB storage device. There should be no other files within the USB storage device.
  • Page 4 Procedure: Connect a blank (formatted) USB storage device to your computer, then locate and copy the correct update “xxx.scd” file onto the USB storage device. 1. Start the vehicle engine (in an open, well-ventilated area). 2. Connect the USB storage device to the USB input on your unit. 3.
  • Page 5 10. The product will reboot after the update is finished. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to the menu screen. 11. The firmware update is now complete. Your Pioneer Audio Receiver is now ready for use. Verify that the firmware has been updated Perform the same procedure for “Displaying the firmware version”...
  • Page 6 Verify that the firmware on your unit is 08.14, 18.03, or 28.03, as applicable. Contact Information If you have any questions, please contact Pioneer Customer Service toll free at 1-800-421-1404, Monday through Friday, 7:30 AM - 11:30 AM and 12:30 PM - 4:00 PM (Pacific Time), excluding holidays, or online through https//parts.pioneerelectronics.com/contact.