Table of Contents
Advertisement
DIGITAL MEDIA RECEIVER
RÉCEPTEUR MÉDIA NUMÉRIQUE
RECEPTOR DE MEDIOS DIGITALES
MVH-X390BT
Owner's Manual
Mode d'emploi
Manual de instrucciones
Important (Serial number)
The serial number is located on the bottom of this unit. For your own
security and convenience, be sure to record this number on the
enclosed warranty card.
Important (Numéro de série)
Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité
et votre commodité, veillez à noter ce numéro sur la carte de garantie
fournie.
Importante (Número de serie)
El número de serie se encuentra en la parte inferior de esta unidad. Por
su propia seguridad y comodidad, asegúrese de anotar este número en
la tarjeta de garantía que se adjunta.
Advertisement
Table of Contents
Related Manuals for Pioneer MVH-X390BT
Summary of Contents for Pioneer MVH-X390BT
- Page 1 DIGITAL MEDIA RECEIVER RÉCEPTEUR MÉDIA NUMÉRIQUE RECEPTOR DE MEDIOS DIGITALES MVH-X390BT Owner’s Manual Mode d’emploi Manual de instrucciones Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
-
Page 2: Table Of Contents
Table of Contents Before You Start Before You Start ................. 2 Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is Getting Started ................4 especially important that you read and observe WARNINGs and CAUTIONs in this manual. - Page 3 Please contact the dealer, distributor from where you purchased this unit or the authorized –Reorient or relocate the receiving antenna. PIONEER Service Station for after-sales service or any other information. In case the –Increase the separation between the equipment and receiver.
-
Page 4: Getting Started
Turn on the power* Press SRC/OFF to turn Press SRC to turn on the on the power. power. MVH-X390BT Press and hold SRC/OFF Press and hold SRC to to turn off the power. turn off the power. M.C. (multi-control) dial... - Page 5 Indication Description Preparing the remote control Appears when a Bluetooth telephone is connected to this unit by Remove the insulation sheet before use. HFP (Hands Free Profile) (page 10) and flashes while the telephone is on hold. How to replace the battery Appears when a Bluetooth audio player is connected to this unit by A2DP (Advanced Audio Distribution Profile) (page 10).
- Page 6 • “Perchlorate Material - special handling may apply. To return to the first item of the setup menu, turn the M.C. dial to select See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)” [QUIT :NO], then press to confirm. Important Press the M.C. dial to confirm the settings. •...
-
Page 7: Radio
Menu Item Description Receiving preset stations SP-P/O MODE Select when there is a full-range speaker connected to the rear speaker output leads and there is a subwoofer Press SRC/OFF to select [RADIO]. [REAR/SUB.W] connected to the RCA output. Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM]. -
Page 8: Usb/Ipod/Aux
CAUTION desired file (folder) name or Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device category, then press to confirm. connected directly to the unit will protrude out from the unit, which could be dangerous. - Page 9 The selected song/album will be played after the currently playing song. Purpose Operation 1 Press Alphabetical search (iPod only) to display the list. NOTE 2 Turn the M.C. dial to select the The selected song/album may be canceled if you use functions other than those from the desired category list, then press link play mode (e.g.
-
Page 10: Bluetooth
PIN CODE Change the PIN code. Select [Pioneer BT Unit] shown in the device display. 1 Press the M.C. dial to display the setting mode. 2 Turn the M.C. dial to select a number. Make sure the same 6-digit number appears on this unit and the device, 3 Press the M.C. - Page 11 Menu Item Description To answer an incoming call DEV. INFO Switch the device information on the display between Press when a call is received. the device name and Bluetooth device address. GUEST MODE Select [ON] to move to the [DEL DEVICE] screen When two phones are connected to the unit via Bluetooth and there is an incoming call automatically when the unit has already been paired [ON], [OFF]...
- Page 12 Menu Item Description Voice recognition (Only for iPhone) PB A.SYNC Select whether or not to transfer the contacts from your This function is only available when an iPhone equipped with voice phone automatically when your phone is connected to [ON], [OFF] recognition is connected to the unit via Bluetooth.
-
Page 13: App Mode
This function is compatible with devices that have Android OS 2.3 or later installed. Fast forward or reverse Press and hold NOTE PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT Select a track Press LIMITATION THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF... -
Page 14: Pandora
[PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate Pandora internet radio is a music service not affiliated with Pioneer. More correctly. information is available at http://www.pandora.com. -
Page 15: Spotify
M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed. Spotify is a music streaming distribution service not affiliated with Pioneer. Turn the M.C. dial to select [BLUETOOTH] for the Bluetooth connection. -
Page 16: Using Pioneer Arc App
Using Pioneer ARC APP You can make various adjustments in the FUNCTION settings (page 17). You can operate the unit from Pioneer ARC APP installed on an iPhone/ NOTE Android device. In some cases, you can control aspects of the application, such The available operations may vary according to the type of contents (track/album/artist/ as source selection, pause, etc., by using the unit. -
Page 17: Settings
Press the M.C. dial to display the main menu. NOTE If Pioneer ARC APP has not been installed on your Android device yet, a message that Turn the M.C. dial to select one of the categories below, then press to prompts you to install the application will appear on your Android device. -
Page 18: Audio Settings
Menu Item Description Menu Item Description LOCAL NEW STATION FM: [OFF], [LV1], [LV2], [LV3], Restrict the tuning station according to the [FROM TRACK], [FROM Create a new station based on the track or [LV4] signal strength. ARTIST] artist currently being played. AM: [OFF], [LV1], [LV2] PAUSE SEEK... -
Page 19: System Settings
Menu Item Description Menu Item Description EQ SETTING [SUPER BASS], [POWERFUL], Select or customize the equalizer curve. [+4] to [–4] Adjust the volume level for each source [NATURAL], [VOCAL], [CUSTOM1] can be set separately for each except FM. [CUSTOM1], [CUSTOM2], source. -
Page 20: Connections For Each Device
Set to [ON] when using the Spotify Please set [PHONE CONNECT] according to the table for the source you want function. to use. For details on Pioneer ARC APP connection, see page 16. BT MEM CLEAR When Pioneer ARC APP connection is NOT performed [YES], [NO]... -
Page 21: Illumination Settings
[OTHERS] is selected) Android USB MTP Android USB MTP Bluetooth PANDORA, APP, Bluetooth PANDORA, SPOTIFY ANDROID (Android Music), SPOTIFY When Pioneer ARC APP connection is performed ILLUMINATION settings Setting Value Device Connection Available source(s) method [IPHONE/IPOD] PANDORA, SPOTIFY Menu Item Description Bluetooth... -
Page 22: Connections/Installation
Menu Item Description Connections/Installation MIX PATTERN [SOUND LEVEL] Change the MIXTRAX special effects Ground wire POWER AMP Connections according to the audio level. The mix pattern changes according to WARNING the sound level. • When speaker output is used by 4 [LOW PASS] The mix pattern changes according to channels, use speakers over 50 W... - Page 23 adhesive tape around wiring that the power terminal of the auto Rear speaker comes into contact with metal antenna. Doing so may result in White parts to protect the wiring. battery drain or a malfunction. White/black – Place all cables away from moving •...
- Page 24 • The semiconductor laser will be Dashboard Power amp (sold separately) damaged if it overheats. Install this Mounting sleeve Perform these connections when unit away from hot places such as • Make sure that the unit is using the optional amplifier. near the heater outlet.
- Page 25 • Releasing the front panel allows lever. Be sure to install the easier access to the trim ring. microphone in such a way that it will • When reattaching the trim ring, not obstruct driving. It is point the side with the notched recommended to use the clamps (sold tab down.
-
Page 26: Additional Information
→ The connected USB device is not cellular phone, that may cause remains, contact your dealer or an operations, then return to the audible interference. authorized Pioneer Service supported by this unit. USB source. – Move electrical devices that may Station for assistance. - Page 27 is displayed, reconnect the iPod – Disconnect the cable from the – Press BAND/ to make a UPDATE APP and reset it. device. Once the device’s main connection again. → This version of the Pandora menu is displayed, reconnect the application is not supported.
- Page 28 CAUTION → No Bluetooth device found. properly. connection again. • Pioneer cannot guarantee – The device may cause audible – Connect the unit and the device compatibility with all USB mass interference when you are listening via Bluetooth (page 10).
- Page 29 • Audiobook, Podcast: Compatible trademark ADPCM) iPod compatibility CAUTION Bluetooth Pioneer accepts no responsibility for AAC files word mark and logos are This unit supports only the following iPod data lost on the iPod, even if that data registered trademarks owned by Bluetooth models.
- Page 30 • 50 W × 2 ch/4 Ω + 70 W × 1 ch/2 for more information. Media Player) SPP (Serial Port Profile) 1.1 Ω (for subwoofer) AAC decoding format: MPEG-4 AAC MIXTRAX Continuous power output: (iTunes encoded only) (Ver. 10.6 MIXTRAX is a trademark of the and earlier) PIONEER CORPORATION.
- Page 31 CEA2006 Specifications Power output: 14 W RMS × 4 Channels < = (4 Ω and 1 % THD+N) S/N ratio: 91 dBA (reference: 1 W into 4 Ω) NOTE Specifications and the design are subject to modifications without notice.
- Page 32 © 2016 PIONEER CORPORATION. All rights reserved. © 2016 PIONEER CORPORATION. Tous droits de reproduction et de traduction réservés. <QRD3395-A> UC...