Advertisement
Quick Links
System Firmware Update Instructions for Pioneer Receivers
(DEH-X1950UB, DEH-X2950UI, DEH-X3950BT, DEH-X4950BT, MVH-X195UI and MVH-X395BT)
This firmware update (version 8.17) applies only to the following models of Pioneer products sold in
Australia and New Zealand.
IMPORTANT
Please download and print these firmware update instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order described below.
Note: If you have any questions, please contact Pioneer Customer Service toll free on 1800 672 102,
Monday through Friday, 9:00 AM - 5:00 PM, excluding holidays.
In order to perform this update, the following items are needed:
•
Pioneer CD receiver listed above.
•
A USB storage device with the following requirements.
-
2 GB or larger in capacity, formatted to FAT32
-
Should be blank (should not contain any files)
CAUTION
•
DO NOT turn your unit off, eject the USB storage device while the firmware is being updated.
•
You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
Checking the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number of the
firmware.
Procedure:
1.
Start the vehicle engine.
2.
If AV Source is On, Press and hold SRC/OFF to set the unit Source OFF.
DEH-X1950UB
DEH-X2950UI
DEH-X3950BT
DEH-X4950BT
MVH-X195UI
MVH-X395BT
Advertisement
Related Manuals for Pioneer DEH-X2950UI
Summary of Contents for Pioneer DEH-X2950UI
- Page 1 It is important that you complete all steps correctly and in the order described below. Note: If you have any questions, please contact Pioneer Customer Service toll free on 1800 672 102, Monday through Friday, 9:00 AM - 5:00 PM, excluding holidays.
- Page 2 After the “SYSTEM INFO” screen appears, check the firmware version. Verify that the firmware on your unit is not already 8.17. Downloading the firmware update files from Pioneer's website Download the firmware update files by clicking on the following link and finding your product: https://www.pioneer.com.au/firmwaresoftware/...
- Page 3 MVH-X195UI MVH-X395BT • DO NOT perform this firmware update if the model number of your Pioneer product is anything other than one of the above models. • Ensure that the update file is located within the root (top) folder of your USB storage device. There should be no other files within the USB storage device.
- Page 4 Procedure: 1. Connect a blank (formatted) USB storage device to your computer, and then locate and copy the “.scd” file onto the USB storage device. 2. Start the vehicle engine. 3. Connect the USB storage device to the USB input on your unit. 4.
- Page 5 11. The product will reboot after the update is finished. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to the menu screen. 12. The firmware update is now complete. Your Pioneer CD Receiver is now ready for use. Check if the firmware has been updated Perform the same procedure for “Displaying the firmware version”...
- Page 6 Contact Information Pioneer Customer Support Center http://www.pioneer.com.au ------------------------------------------------------------ Copyright(c) 2018 Pioneer Corporation...