Pioneer DEH-S4100BT System Firmware Update Instructions
Hide thumbs
Also See for DEH-S4100BT:
- Operation manual (134 pages) ,
- Firmware update instructions (6 pages) ,
- Firmware update instructions (6 pages)
Advertisement
Quick Links
System Firmware Update Instructions for Pioneer Audio Receivers
(DEH-S31BT, DEH-S4100BT, DEH-S4120BT, DEH-S5100BT, DEH-S5120BT, DEH-S6100BS,
DEH-S6120BS, MVH-S310BT, MVH-S312BT, and MVH-S512BS)
This firmware update (version 08.27, 18.03, or 28.03) applies only to the following models of Pioneer
products sold in the United States and Canada. Installation on any other product could cause
irreversible damage.
DEH-S31BT
DEH-S5120BT
MVH-S312BT
IMPORTANT
Please download and print these firmware update instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and, in the order, described below.
Note: If you have any questions, please contact Pioneer Customer Service toll free at 1-800-421-1404,
Monday through Friday, 7:30 AM - 11:30 AM and 12:30 PM - 4:00 PM (Pacific Time), excluding holidays, or
by email through parts.pioneerelectronics.com/contactus.
In order to perform this update, the following items are needed:
•
Pioneer CD receiver listed above.
•
A USB storage device meeting the following requirements.
-
2 GB or larger in capacity, formatted to FAT32
-
Blank (should not contain any files)
CAUTION: DO NOT turn your unit off or eject the USB storage device while the firmware is being
updated. Any interruption to the firmware update process could cause irreversible damage to the
unit.
WARNING: Install this update only when the vehicle is safely parked in an open, well-ventilated area,
such as an outdoor parking lot, where you can safely keep the engine running to maintain power to the
battery. NEVER RUN YOUR VEHICLE'S ENGINE IN AN ENCLOSED SPACE, WHICH CAN QUICKLY
FILL UP WITH TOXIC CARBON MONOXIDE GAS, LEADING TO SERIOUS INJURY OR DEATH.
Checking the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number of the
firmware. The update version to download and install will depend on the existing firmware version on your
unit.
Your unit's current firmware version Update version
08.XX
18.XX
28.XX
DEH-S4100BT
DEH-S6100BS
MVH-S512BS
DEH-S4120BT
DEH-S6120BS
08.27
18.03
28.03
DEH-S5100BT
MVH-S310BT
Advertisement
Related Manuals for Pioneer DEH-S4100BT
Summary of Contents for Pioneer DEH-S4100BT
- Page 1 (DEH-S31BT, DEH-S4100BT, DEH-S4120BT, DEH-S5100BT, DEH-S5120BT, DEH-S6100BS, DEH-S6120BS, MVH-S310BT, MVH-S312BT, and MVH-S512BS) This firmware update (version 08.27, 18.03, or 28.03) applies only to the following models of Pioneer products sold in the United States and Canada. Installation on any other product could cause irreversible damage.
- Page 2 Procedure: Start the vehicle engine (in an open, well-ventilated area). If AV Source is On, Press and hold SRC/OFF to set the unit Source OFF. Press M.C. (multi-control) to display the “Initial ”menu. then press to confirm. Turn M.C. dial to select “SYSTEM UPDATE”, then press to confirm. Select the “SYSTEM INFO”...
- Page 3 Updating the firmware on your Unit IMPORTANT • DO NOT perform this firmware update if the model number of your Pioneer product is anything other than one of the above models. • Ensure that the update file is located within the root (top) folder of your USB storage device. There should be no other files within the USB storage device.
- Page 4 Procedure: 1. Connect a blank (formatted) USB storage device to your computer, and then locate and copy the “.scd” file onto the USB storage device. 2. Start the vehicle engine. 3. Connect the USB storage device to the USB input on your unit. 4.
- Page 5 9. After starting, there will be a progress status while updating. -> If it shows “ERROR” on the display, Try the following to retry Version up. “ERR->RETRY” Disconnect / connect the USB storage device. And press M.C. dial 10. Wait for until the Version Up complete. (For about 5 minutes) ->...
- Page 6 Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to the menu screen. 17.The firmware update is now complete. Your Pioneer CD Receiver is now ready for use. Check if the firmware has been updated Perform the same procedure for “Displaying the firmware version”...
- Page 7 After the “SYSTEM INFO” screen appears, check the firmware version. Contact Information If you have any questions, please contact Pioneer Customer Service toll free at 1-800-421-1404, Monday through Friday, 7:30 AM - 11:30 AM and 12:30 PM - 4:00 PM (Pacific Time), excluding holidays, or online through https//parts.pioneerelectronics.com/contactus.