Auto; Full Display; Zoom Full Page - Standard Horizon FF520 Installation And Operation Manual

The Page Selection options are:
5.1.0

Auto

Automatically switches the transmit frequency depending on the water depth:
a. 200kHz, less than 400Ft
b. 50kHz, greater than 400Ft
5.1.1

Full Display

Allows the user to setup the Chart Plotters display to show 200kHz, 50kHz or 200/50 kHz
split screen Fish Finder.
5.1.2

Zoom Full page

Allows the user to zoom into the 200kHz or 50kHz Fish Finder display to show detail of the
area selected by the VRM (Variable Range Marker). The right display shows the zoomed
display and the right display shown the unzoomed display.
To select the area to be zoomed in move the ShuttlePoint knob Up or Down which moves
the VRM line.
To zoom In or Out, press [ZOOM IN] or [ZOOM OUT] or, on the CPV350 and CPV550 press
[ZOOM] and rotate the channel knob.
The zoom ranges are 2x and 4x the normal Fish Finder display.
Page 28
Figure 5.1 - Page Selection menu
Figure 5.1.1 - Full Display pages
Figure 5.1.2 - Zoom Full page
FF520