Hydromassage Jets; Soothing Seven ® Jet; Precision ® Jets; Jetstream ® Jet - HotSpring Portable Spaa Owner's Manual

Table of Contents

HYDROMASSAGE JETS

The Hydromassage jets have two different nozzle options: directional and dual port rotary. The directional nozzle allows you to aim the water in the

direction that feels best. The dual port rotary nozzle divides the water flow into two streams, and then spins.

ACCESSORY NOTE: Your Hot Spring

directional to dual port rotary.

SOOTHING SEVEN

The Soothing Seven jet is another unique feature of Hot Spring spas. Its seven outlets are designed to massage the muscles in the upper back

and shoulders, gently and thoroughly. Turn the faceplate clockwise to increase the jet pressure and counterclockwise to decrease the jet pressure.

PRECISION

Precision jets are located above Moto-Massage

™

Vanguard

, Sovereign

, Aria

and Prodigy models. They are designed to perform a soft, soothing massage on your back and shoulders. Adjust the

pressure of the Precision jets using the Comfort Control

Refer to the drawings on the following pages to familiarize yourself with the SmartJet

lever side of the spa is always considered the front when referring to the locations of the different types of jets and jet systems. The clock

positions are correct when facing the spa, standing at the SmartJet lever.

JETSTREAM

The JetStream jet is a large orifice hydromassage jet designed to put maximum massaging action on a specific area of the body. It is located in the

lower part of the spa to afford optimal access for the massaging of feet, legs, hips, and lower back. The intensity of the JetStream jets can be

altered (except the ones found in the FootWell

HYDROSTREAM

The Hydrostream jet is a mid-size hydromassage jet that delivers a great massage to the feet, back and shoulder areas. This jet can be adjusted at

the face plate for greater or lesser intensity.

ACCESSORY NOTE: Your Hot Spring Dealer stocks rotary nozzle HydroStream jet kits that can easily be installed in your Vista or Envoy spa to

modify the jet from directional to dual port rotary.

WATER FEATURE

Grandee (GG), Vista, Envoy and Aria spas are equipped with a BellaFontana

speed pump is on low speed (tranquil mode) or high speed. To function correctly, the water feature on/off lever must be placed in the full on position only.

If the lever is not in the full on position when the pump is on high speed, it is likely that the water feature will project water substantially farther out

into the spa as the on/off lever is opened. This is not proper operation. If this occurs, the pump should be turned off, the water feature lever rotated

to the full on position and the pump turned on again.

CAUTION: Partial blockage of water flow at entrance of water feature will cause the water to flow farther into or over the spa.

Vanguard (VV) and Sovereign (II) models (Sand, Azurite, Pearl, and Sterling marble spas only) also have a water feature system. The water feature

will either be located on the left or right side of the spa towards the front depending on the model. A lever located next to the water feature is used to

adjust the water from full flow to completely off. The circulation pump of the spa powers the water feature allowing the water to run all of the time if

desired. Turning the water feature lever to it's full clockwise position will shut the water feature off.

IMPORTANT: It is recommended that the water feature found on the Vanguard and Sovereign be turned off before placing

the cover onto the spa.

dealer stocks hydromassage jet kits which can easily be installed in your spa to modify your jets from

JET

JETS

jets (except Prodigy

lever (located closest to the Precision jets).

JET

system) using the Comfort Control lever. JetStream jets located in the FootWell are not adjustable.

JET

(VISTA, ENVOY, ARIA & JETSETTER [JJ] SPAS ONLY)