Heating Up Of The Cleaning Liquid (Units With Heating).18 - Elma Elmasonic S Operating Instructions Manual

Ultrasonic cleaning process
7.1
CAUTION
NOTE
How to proceed
Heating control by
turning temperature
knob
18
Heating up of the cleaning liquid
(units with heating)
Depending of the degree and kind of contamination and on the
cleaning medium used it might be required to heat up the
cleaning liquid. For a quick heating-up process and in order to
prevent unnecessary energy losses we recommend to use a
cover (optional accessory equipment).
The ultrasonic energy is transformed physically into heat. Low
set temperatures can be exceeded during ultrasonic operation.
The cleaning effect through ultrasonic cavitation is reduced
when cleaning with high temperatures. We recommend not to
exceed a temperature of 80°C inside the tank.
For the recommended cleaning temperature please observe the
product information of the used elma clean cleaner.
High temperatures! Risk of burning and scalding!
Cleaning liquid, cleaning tank, casing, lid, basket and cleaning
items can heat up considerably.
Do not reach inside the bath.
If necessary wear protective gloves when touching unit and
basket!
Cleaning temperature recommendations in the medical sector:
Please observe that the temperature of the cleaning media
remains below 42°C when cleaning parts contaminated with
fresh protein or blood.
Please observe the temperature even when using low or no
heating.
Press the on/off key to start the unit.
Select the required cleaning temperature by turning the
temperature knob.
S 10 H: LED display is on and indicates heating operation.
S 15 H – S 900 H: The set temperature is indicated by the
permanently lighting LED.
The heating is operated until the set temperature is reached.
S 15 H – S 900 H: The LED display also indicates the actual
temperature by a blinking light (not on S 10 H).
As soon as the actual temperature is equal to or higher than the
set temperature, the heating switches off.
S 10 H: LED display off.
S 15 H – S 900 H: the corresponding LED lights permanently.
BA/Elmasonic S/GB/020706 © Elma GmbH & Co KG