Connecting The Unit To The Mains - Elma Elmasonic S Operating Instructions Manual

Initial operation
5.2
Required mains
conditions
Connect mains cable
14
4. The drain duct is now ready for connection to a customer-
provided discharge system. Use a standard tube (dia 1/2").
Push the tube onto the socket and fix it with the clamp
included in the delivery.
Illustration 5.1
Drain with plastic screw cap

Connecting the unit to the mains

Earth grounded socket:
1 phase (220-240 V); 1 N; 1 PE protective earth.
Elmasonic S 450 H / S 900 H in countries with 120 V mains:
2 phases (120 V); 1 N; 1 PE protective earth.
Diagram: required mains conditions for S 450 H / S 900 H in 120 V mains.
Use the plug-in mains cable delivered with the unit. Connect the
unit to a grounded shockproof socket only. Ensure that the
values indicated on the nameplate of the unit must correspond
with the available connecting conditions.
BA/Elmasonic S/GB/020706
Illustration 5.2
Drain fitted with standard tube
© Elma GmbH & Co KG