Ceiling Mounting - HIKVISION DS-2CD4012F-A Quick Operation Manual

Network Box Camera·Quick Operation Guide
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
● The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are attached seamlessly.
2.1

Ceiling Mounting

Steps:
1. Install the ceiling mount to the ceiling with the supplied expansion
screws.
Figure 2-1 Install the Mount
13
Adjustable Nut