Cooling System; Operator Controls; Seat - Exmark Lazer Z Operator's Manual

Hide thumbs Also See for Lazer Z:
Table of Contents

Advertisement

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
2.4.6
2.4.7
2.4.8
2.5 COOLING SYSTEM (Kawasaki 22 & 23 HP Liquid-cooled units only)
2.5.1
2.5.2
2.5.3

2.6 OPERATOR CONTROLS

2.6.1
2.6.2
2.6.3
2.6.4
2.6.5

2.7 SEAT

2.7.1
2.7.2
Fuses: Kohler Air-cooled units –Two 20 amp blade type
Kohler 26 HP EFI units – Two 20 amp and one 10 amp blade type
Kawasaki 22 & 23 HP Liquid-cooled units – One 20 amp and two 30 amp
Safety Interlock System:
For Kohler units Serial Nos. 251,999 and Lower and all Kawasaki units:
Operator must be in seat with Blades disengaged, brake engaged, and
motion control levers out (neutral lock) to start engine.
For Kohler units Serial Nos. 252,000 and Higher:
Blades must be disengaged, brake engaged, and motion control levers out
(neutral lock) to start engine. (It is not necessary for the operator to be in the
seat to start the engine.)
For all units:
Operator must be in seat when Blades are engaged, brake is disengaged, or
motion control levers are moved in or engine will stop.
Engine will stop if either the left, the right, or both levers are moved from neutral
lock position while brake is engaged.
Tilt Switch: (Serial Nos. 220,000 & Higher) Shuts off the engine when the unit is
tilted more than 60° from horizontal.
Fan: Thermostatically controlled electric
Coolant Liquid:
Kawasaki 22 HP Liquid cooled: 50/50 mix of ethylene glycol and water.
Kawasaki 23 HP Liquid-cooled: 50/50 mix of DexCool© extended life
Coolant Capacity: 4 quarts
Steering and Motion Control:
Separate levers, on each side of the console, control speed and direction of
travel of the respective drive wheels.
Steering is controlled by varying the position of the levers relative to each other.
Moving motion control levers outward (in slots) locks the drive system in neutral.
Blade Engagement Switch: Engages electric clutch (to drive belt) which
engages mower blades.
Parking Brake Lever: Sets brakes.
Deck Height Adjustment Lever: Sets cutting height to desired position.
Deck Lift Assist Lever: Kohler 26 HP EFI units – Foot pedal that assists in
raising the deck. (This lever is an optional accessory for all other units.)
Type: All units except Kohler 26 HP EFI - Standard seat with high back, foam
padded (internal suspension) and armrests.
Kohler 26 HP EFI units - Deluxe suspension seat with high back, low profile
foam-in-place cushion (dampened, adjustable spring suspension) and armrests.
(This seat is an optional accessory for all other units)
Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other
components. Held in tilted position with prop rod. Adjustable fore and aft seat track.
www.mymowerparts.com
blade type
antifreeze and water.
- 11 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents