2Wire 3800HGV-B User Manual page 41

Item
Network Name
Authentication
Encryption
Channel
Devices (the information displayed is dependent on the gateway model features)
Ethernet
Wireless (802.11)
HomePNA
USB
MoCA
Public Network
Router Address
Subnet Mask
Access the Management and Diagnostic Console
Description
The default setting is the word "2WIRE," followed by the
last three digits of the 2Wire gateway serial number.
The authentication method used: Open, Shared, or WPA-
PSK (Wi-Fi Protected Access pre-shared key).
The encryption method used: WEP or TKIP .
The frequency channel in use. The default channel is 6. If
multiple access devices within the vicinity use the same
channel, you can set a different channel to eliminate poten-
tial interference.
The number of Active and Inactive Ethernet devices on the
network.
The number of Active and Inactive wireless devices on the
network.
The number of Active and Inactive HomePNA devices on
the network.
Specifies whether a USB device is present (Active) on the
network. If a USB device is not present, the value is
Inactive.
The number of Active and Inactive MoCA devices on the
network.
Defines a separate network on the home side.
The subnet mask allocated for public address.
39