Usb To Pc Connection; Install The 2Wire Gateway Usb Driver - Windows - 2Wire 3800HGV-B User Manual

USB to PC Connection

Connect the provided AC power adapter from the 3700HGV-B's
1.
the 3700HGV-B has completed its start up process, the
should be green.
Connect the provided blue USB cable from the 3700HGV-B's
2.
computer.
If the VDSL signal is carried over the phone line, connect the provided gray phone cable from the
3.
3700HGV-B's
PHONE LINE
page 11.

Install the 2Wire Gateway USB Driver - Windows

Insert the 2Wire setup CD in your computer's CD-ROM drive.
1.
Power on the computer. If the Add Hardware Wizard displays, follow the on-screen instructions. If
2.
prompted to identify where to search for drivers, deselect
After the driver installs click
3.
when the PC has rebooted.
Note:
Microsoft Windows 98 users may be prompted to insert the Windows 98 installation CD-
ROM after installing the 2Wire gateway USB drivers. After the Windows 98 updates are complete,
remove the Windows 98 CD and reinsert the Setup Wizard CD into the CD-ROM prior to rebooting
the PC.
port to telephone wall jack. If the VDSL signal is carried over coax, refer to
to complete the driver installation. The Setup Wizard will resume
Finish
Connect the Computer to the Gateway
port to an electrical outlet. After
POWER
light on the front of the 3700HGV-B
POWER
port to the USB port on the
USB-PC
and check
Floppy Disk drive
.
CD-ROM drive
9